Extending the life of hearing aid batteries

Extending the Life of Hearing Aid Batteries

Most hearing aids on the market today are powered by disposable zinc-air batteries.  For hearing aids to work properly, wearers need to replace their zinc-air batteries regularly, which can be quite costly over time.   In this article, we will discuss how to extend the life and get the best performance from zinc-air hearing aid batteries.

Why do hearing aids use zinc-air batteries?

There are two main reasons why zinc-air batteries are used in hearing aids.  Firstly, they have high energy density.  As hearing aids are designed to be small and discreet; it is important that they use batteries that are also small, but with enough capacity to run the hearing aid.  The energy requirements of a hearing aid far exceed that of other body-worn devices such as watches.  The second reason is that zinc-air batteries are relatively inexpensive to produce.  Given that zinc-air batteries often need to be replaced weekly, this is an important consideration.

Currently there are four main sizes of zinc-air button-sized batteries on the market.  These batteries have a coloured sticker tab which represents the size of the battery.  These sizes and colour coding are standard in the industry.  The most common size used globally is size 312 (brown).

How do zinc-air batteries work?

Zinc-air batteries work differently from traditional AA or AAA batteries that may be lying around the house. Not only as they much smaller, being “button” sized, they have a different battery chemistry that requires air to operate.  They work by oxidizing zinc with oxygen from the air.

You will notice that all zinc-air batteries have four fine holes on their positive side for this purpose.  Oxygen slowly passes through these holes once the sticker tab is removed.  As air enters the holes on the battery’s surface, the battery generates its power (see picture).

Optimising the performance of zinc-air batteries

There are several things you can do the optimise the lifespan of your zinc-air batteries.

Firstly, only use fresh batteries, i.e. ensure batteries are used within their “use by” date.  Fortunately zinc–air batteries have a long shelf life if sealed to keep air out.  They can be stored for up to 3 years at room temperature with little capacity loss if their seal is not removed.  The performance of zinc-air batteries degrades significantly if past their use-by date.

Secondly, allow enough “air up” time.  After the sticker tab is removed, allow the battery to sit for one minute before inserting the battery into the hearing aid.  This allows enough time for air to get into the battery.  Taking the tab off and immediately putting the battery in the hearing aid, limits the amount of air it is exposed to.  The consequence of this is that the battery may not work properly, as the voltage has not reached a level sufficient to power the hearing aid’s digital circuit.  If this happens, allow air to enter the battery (increasing its voltage) by opening the battery door.  After one minute, close the battery door.

Battery Life Expectancy

The expected life of a hearing aid battery in days, can have high variability depending on how often the hearing aids are used, the wearer’s hearing loss and what hearing aid features are being used (for example, Bluetooth streaming uses a lot of power).

In summary wearers can expect

Size 10:   3 – 10 days

Size 312:   3 – 12 days

Size 13:   6 – 14 days

Size 675:   9 – 20 days

For hearing aid wearers that like to test their hearing aid batteries, please be aware that although the package states a specific voltage (e.g. 1.45 volts), the tabbed voltage will be much lower (e.g. 1.1 – 1.3 volts).  After un-tabbing, voltage will rise enough to power a hearing aid.  The cell may need several hours to rise to maximum voltage.

Best Value Hearing Aid Batteries in Australia

At Sounds of Life we offer the best value hearing aid batteries in Australia.

Check out our great prices on the premium Power One batteries.  We offer special bulk pricing of $27.50 for ten cards (sixty batteries).

Batteries can be ordered directly from our website with free postage.

https://www.soundsoflife.com.au/shop-online/

Australia’s top-selling hearing aid battery brand, Power One is manufactured in the world’s largest and most up-to-date hearing aid battery plant in Ellwangen, Germany.  Power One batteries offer the highest quality and reliability, with an extremely long lifespan.

If you feel hearing loss is impacting your life contact Sounds of Life.

Contact us today on 1300 744 432 or via our contact form below:

    Your Name (required)

    Your Phone Number (required)

    Your Message

    About Sounds of Life

    Sounds of Life Audiology is a leading, independent hearing aid specialist.  We offer transparent and affordable hearing aid pricing on quality hearing aids (including virtually invisible hearing aid technology) from the world’s leading brands.

    Are Your Hearing Aids Working To Their Potential? The Importance Of Real Ear Measurements

    ear measurements brisbane

     

     

     

    Are your hearing aids working to their potential?

    The Importance of Real Ear Measurements

     

    The goal of a hearing aid fitting is to provide customised sound amplification that compensates for an individual’s hearing loss.  The basis for determining this customised amplification is an individual’s audiogram (hearing test).

    For most individuals with hearing loss, the degree of their hearing loss varies across the different frequencies (pitches).  Consequently, a hearing aid needs to be programmed to provide the correct amount of amplification at each individual sound frequency to precisely compensate for the hearing loss.  For example, for age-related hearing loss, hearing will often be worse in the higher frequencies compared to the lower frequencies.  In such cases, a hearing aid would need to be programmed to provide more high frequency amplification.

    First Fit

    When setting up a hearing aid for the first time, the audiologist will do an initial programming of the hearing aids using the hearing aid manufacturer’s software.  This initial programming is called a “first fit” and uses the individual’s hearing thresholds (audiogram) to determine a predicted target amplification response and the hearing aids a programmed to match this target.

    As the name suggests the “first Fit” is just the initial set-up.  To ensure the hearing aid is providing the correct amount of amplification at the individual’s eardrum, there are additional factors other than the individual’s audiogram that also need to be considered.  These factors include the physical characteristics of how the hearing aid is coupled to the individual’s ear (e.g. ear mould), as well as the physical properties of the individual’s ear canal (e.g. shape).

     

    Everybody’s ears are different and both the ear mould and ear canal shape can significantly influence amplified sound.  An accurate hearing aid fitting needs to consider all these factors so that the hearing aid provides the exact amount of amplification at the ear drum.  To do this an audiologist should conduct real ear measurements (also called probe microphone measurements or insertion gain) and fine-tuning.

     

    Real ear measurement and fine-tuning

    real ear measurementsFollowing the “first fit”, audiologists should measure the hearing aid’s amplification in the ear canal close to the ear drum.  This involves placing a tube called a probe-tube, deep into the ear canal, approximately 12 mm from the ear drum (tympanic membrane).  This tube is connected to a sensitive microphone and has the role of measuring sound levels near the ear drum.  With the hearing aid inserted and turned on, the audiologist can then make accurate measurements at the eardrum of how much the hearing aid is amplifying sound across the range of frequencies. Based on these real ear measurements, the audiologist can then fine-tune the hearing aid to provide the optimal amplification response to optimise speech clarity and wearing comfort.  Further fine-tuning may also be done based on the individual’s personal sound preferences.

    Real ear measurements are an important procedure to ensure that hearing aids are precisely programmed and customised to account for both an individual’s hearing loss and their physical anatomy.   Unfortunately to save time, many hearing clinics do not use real ear measures and simply rely on the “first fit” in the hearing aid manufacturer’s software.   If you are in the process of getting hearing aids make sure you request your audiologist use real ear measurements.

    At Sounds of Life Audiology we quite regularly see clients who have purchased hearing aids elsewhere who are unhappy with their performance.  One of the first things we will do is conduct some real ear measurements to see what the hearing aids are doing.  Often these measurements reveal that the hearing aids were not programmed properly for the client.  By simply reprogramming and fine-tuning the hearing aids based on the real ear measurement results we are often able to solve the client’s problems without them having to invest in a new set of hearing aids.

    At Sounds of Life we believe in providing hearing aids that are fully customised and optimised for wearers.  We use real ear measurements as a standard procedure for every hearing aid fitting.  It is only by doing this can we be sure we are making the most of the impressive hearing aid technology that is available today.

    If you feel hearing loss is impacting your life contact Sounds of Life.

    Contact us today on 1300 744 432 or via our contact form below:

     

      Your Name (required)

      Your Phone Number (required)

      Your Message

       

      About Sounds of Life

      Sounds of Life Audiology is a leading, independent hearing aid specialist.  We offer transparent and affordable hearing aid pricing on quality hearing aids (including virtually invisible hearing aid technology) from the world’s leading brands.

       

       

      Why can’t I wirelessly stream audio from my Android phone directly to my hearing aids?

       

       

       

      Why can’t I wirelessly stream audio from my Android phone directly to my hearing aids?

       

      Wireless audio streaming has become very popular for hearing aid wearers over the last couple of years.  Hearing aid wearers can turn their hearing aids into virtual headsets and experience the convenience of wirelessly listening to music or taking phone calls from their mobile phone.

      Direct audio-streaming is the ultimate in convenience, as wearers do not need to wear an additional accessory.   Audio is wirelessly streamed from the audio device (e.g. mobile phone) directly into the wearer’s hearing aids.  Currently most hearing aid models support “Made for iPhone” technology enabling direct audio-streaming (without an intermediary device) from Apple iPhones.  However, unfortunately this direct audio-streaming technology has not been available broadly with Android phones.  Most hearing aids support audio-streaming from Android phones using an intermediary (relay) device.

      The following article provides a current overview of the status direct audio-streaming with Android phones.

       

      Background and Challenge

      Bluetooth is a wireless networking protocol designed to wirelessly connect devices together.  Bluetooth is used to connect computer peripherals (like mice, keyboards, printers etc) to a computer, as well as connect accessories like headsets (for hands free operation) to mobile phones.

      Most phones currently support Bluetooth 4.2 and its two variants: Bluetooth Classic and Bluetooth Low energy.  Unfortunately, neither type is suitable in their native state for allowing wireless audio-streaming to hearing aids

       

      • Bluetooth Classic is ideal for connecting mobile phones to Bluetooth headsets for phone calls. Unfortunately, Classic Bluetooth’s power consumption is too high to support hearing aids1. 
      • Bluetooth Low energy (BLE) is an ultra-low power version of Bluetooth meant for low power sensors and accessories. Unfortunately, the standardized BLE, implemented in all modern phones, does not support audio streaming.

       1 unless significant compromises are made

       

      So how does Apple mobile phones support direct audio-streaming?

      Apple’s iPhone was the first phone to offer direct wireless audio-streaming to hearing aids supporting their “Made of iPhone” standard.  As mentioned, because Bluetooth Low Energy does not support audio streaming in its native state, Apple created its own (proprietary) Bluetooth Low Energy version that did (it’s called ABLE).  Using this technology iPhones can stream audio directly to all “Made for iPhone” hearing aids.

      http://www.idownloadblog.com/2017/08/03/apple-bluetooth-low-energy-audio/

      Currently all major hearing aid manufacturers have models support this “Made for iPhone” standard.  https://support.apple.com/en-au/HT201466

       

      What about direct streaming with Android mobile phones?

      We all know that most of the world’s mobile phones run Android (estimated at 85 percent).  Consequently, there is certainly demand from hearing aid wearers for direct audio streaming from their Android devices.  However, Android fragmentation has made it difficult for hearing aid manufacturers to provide support to Android devices.

      As discussed above, the standard Bluetooth protocols used in Android phones (and many other audio consumer products) are not suitable to stream audio to hearing aids.  However, recently one hearing aid manufacturer, Phonak, managed to offer direct wireless audio streaming from Android phones albeit with some compromises.

       

      Phonak Marvel Hearing Aids Offering Direct and Android Audio-Streaming

      Recently Phonak released a range of hearing aids on its latest Marvel platform.  The new platform uses a new chip called SWORD (stands for Sonova Wireless One Radio Digital Chip).  This proprietary radio chip supports direct audiostreaming using the Bluetooth Classic protocol.  This ensures Phonak Marvel hearing aids are compatible with any mobile device supporting Bluetooth 4.2 (and the Hands-Free Profile).

      It is important to note that due to some technical limitations the hearing aids do have some compromises.  Firstly, compared to other wireless hearing aids, battery consumption is higher.  In addition, some high-performance binaural audiology features are not available with Marvel hearing aids (e.g. being able to select the direction of directionality).

       

      Will there ever be hearing aids that support wireless audio-streaming from Android phones without such compromises?

      The good news is that recently Google released Android 10 that supports a new hearing aid protocol for Android phones called Audio Streaming for Hearing Aids (or ASHA).  ASHA is currently supported by the Google Pixel 3 range of smartphones.  The protocol aims to provide energy-efficient, high-quality audio streaming with low latency:

      https://android-developers.googleblog.com/2018/08/streaming-support-spec-for-hearing-aids_16.html

      Currently two hearing aid models support this ASHA standard and offer direct streaming with compatible Android phones; ReSound LiNX Quattro and Starkey Livio.  It is expected that given the new Android specification is open source, most hearing aid manufacturers will quickly follow suit during 2020 by releasing hearing aids that support this protocol.

       

      About Sounds of Life

      Sounds of Life audiology is a member of Audiology Australia and Independent Audiologist Australia. We adhere strictly to Code of Conduct and Code of Ethics.   We pride ourselves on:

      • Being fully independent – We are not owned or operated by a hearing aid manufacturer or large chain.
      • Ethical Practices – We are focused on providing the highest level of care and do not pay commissions.

      We also follow the Australian Government Hearing Services’ protocol for hearing services.

       

      If you feel hearing loss is impacting your life contact Sounds of Life.

      Contact us today on 1300 744 432 or via our contact form below:

       

        Your Name (required)

        Your Phone Number (required)

        Your Message

         

         

        Signia Xperience Hearing Aid Review

         

         

         

        Signia Xperience Hearing Aid Review

        Hearing What Matters to You

         

        Signia has just released its latest range of hearing aids on its new premium hardware platform; Signia Xperience.   Signia Xperience hearing aids promise to deliver a much more personalised sound experience for wearers.

        People live active lives.  Using new world’s first acoustic-motion sensor technology, Signia Xperience hearing aids are able to not only analyse the wearer’s current acoustic environment, but also how they are interacting within this environment.  This information is used to better understand the wearer’s listening needs (and what matters to them) and dynamically adapt as their needs change.

        In this review, we will be having a look at this new ground-breaking acoustic-motion sensor technology and how it is being used to give hearing aids a new sense.  This is very much a paradigm shift in hearing technology so we will start by having a look at how current hearing aid technology adapts to wearers when their listening situation changes.

         

        How hearing aids adapt to changing listening situations

        For the hearing aid wearers, hearing can go from easy to virtually impossible in a matter of seconds as they move from one place to another.  For example, for some hearing aid wearers hearing 1 to 1 conversation in quiet can be quite easy, however, hearing in a busy restaurant can be very difficult.

        Like an automatic car that changes gears to adapt to the driver’s speed, all modern hearing aids are designed to operate automatically and adapt to the hearing aid wearer’s changing environment.  They utilise a suite of technology (e.g. directional microphone and noise reduction technology) to enhance speech and reduce background noise when required.  However, just like you don’t want your automatic car going into reverse as you are travelling down the highway at 100 km/h, it is important that the right hearing aid features are seamlessly activated and deactivated at the right time!  Otherwise the sound quality of the hearing aids becomes unnatural and speech clarity is compromised.

        In order to achieve this, modern hearing aids use an environmental classification system.  They attempt to classify the environment based on its measured acoustics.  Common classifications include “speech in quiet”, “speech in noise”, “noise only”, “music” etc.  These classifications are used as a basis of what hearing aid features are turned on and off.

         

        The limitation of traditional hearing aids

        One limitation of traditional hearing aids is that they do not really know the needs of individual wearers.   When a specific environment is classified, e.g. speech-in-noise, hearing aids adapt for all wearers in an identical way.  They assume everybody in a specific environment has the same hearing needs.  As we know, often this is not the case.

        Imagine a busy city street with a lot of background noise.  You could have two different people in the same environment with completely different hearing needs.   Person One is walking down the sidewalk and crossing roads as they journey through the city.  Their priority is good environmental hearing awareness, so they can safely navigate their journey (e.g. avoiding cars), rather than hearing the specific conversations of the people they pass by.  Person Two is standing talking to their friend one-to-one on the sidewalk.  Their priority is to hear their friend clearly and comfortably.   To achieve these goals requires completely different hearing aid features.

         

        World’s First Acoustic-Motion Sensor Technology

        To better adapt to the hearing aid wearer’s needs, hearing aids need to understand more than just the acoustic environment they are in, they need to understand what the wearer is doing in that environment.  The new Signia Xperience achieves this using new acoustic-motion sensors that gives the hearing aids a new sense.  This information is the basis of a new approach to sound processing, Signia calls Dynamic SoundScape Processing.

        Not only does Signia Xperience analyse and process more aspects of sound than ever before (to better understand the acoustic environment e.g. noise level, signal-to-noise ratio, direction and distance), it uses accelerometers to understand how the wearer is interacting in this environment (e.g. walking, running or standing).  This information is used as the basis of better predicting the wearer’s hearing needs and ensuring the hearing aid provides optimal hearing support for these needs.   Signia calls this YourSound technology.

         

        Audiological Performance

        In terms of audiological performance, the new Signia Xperience is market leading.  It features Signia’s leading binaural sound processing technology, including its high-performance directional microphone system (narrow directionality and spatial speechfocus).  This technology delivers outstanding sound quality and sound clarity in challenging situations with a lot of background noise.

        Signia Xperience also features Own Voice Processing (OVP™) technology providing a more natural wearing experience.  The benefit for the wearer is that their own voice sounds more natural without the audiologist having to turn the hearing aids down for all the other sounds the wearer wants to hear.  This technology processes the wearer’s own voice, completely independent from all other sounds, including all other voices.

         

        Connectivity

        The new Xperience hearing aids can be remotely controlled via the free “Signia App”.  This app is available free for Apple and Andoid phones.  Like its predecessor the Nx platform, Signia Xperience features full wireless connectivity including “Made for iPhone” connectivity for direct wireless audiostreaming from Apple devices.  Connectivity to other Bluetooth devices is achieved via the optional StreamLine Microphone.  Wearers can also stream their television audio wirelessly into their hearing aids via the optional StreamLine TV accessory.    

         

        Hearing aid models 

        In the initial launch of Xperience, Signia is releasing two receiver-in-canal (RIC) models: Pure Charge&Go X RIC and Pure 312 X RIC.

         

        Pure 312 X RIC

        The Pure 312 X is Signia’s new slim-line fully featured RIC.  It is highly versatile supporting four receiver powers (S, M, P and HP).  Signia has advices that in December 2019, the Pure 312 X RIC can be upgraded with a telecoil allowing direct connection to look systems that are common in many public spaces e.g. cinemas.

         

         

         

        Pure Charge&Go X RIC (available soon)

        Pure Charge&Go X is Signia’s new lithium-ion rechargeable model with identical features to the Pure 312 X except it does not support the telecoil upgrade.  For many wearers, Lithium-ion rechargeable hearing aid technology is easier and more convenient to manage compared to disposable battery hearing aid models, as there is no need for weekly battery changes.     The Pure Charge&Go X is charged in a supplied wireless (inductive) charger and takes 3-4 hours to fully charge.  During the charging process the charger goes through a drying cycle to dehumidify the hearing aids.

        The Pure Charge&Go X is 16% smaller than its predecessor on the Nx platform.  In the past lithium-ion hearing aids were significantly larger than their disposable zinc-air battery counterparts.  However, developments in lithium-ion battery technology means that they are now a similar size.  In fact, even though Pure Charge&Go X is smaller, its battery capacity has been upgraded to now give wearers up to 23 hours wearing time.

         

        Our conclusion

        We are very excited about the Signia Xperience range.  Signia has delivered a number of audiological innovations over the last 5 years that have delivered significant benefits for wearers.  In particular, their Own Voice Processing (OVP™) technology has significantly improved the wearing experience.  We believe utilising motion sensor information will significantly improve how the hearing aids adapt to the wearer and further improving the hearing aids’ audiological performance.  We are currently trialling the new technology with clients and will keep you updated on their progress.

         

        Sounds of Life offers the Signia Xperience at Brisbane’s most affordable prices:

        Premium – Pure 312 BT RIC 7X $3790
        High-End – Pure 312 BT RIC 5X $2990
        Mid-Range – Pure 312 BT RIC 3X $2190

        Premium – Pure C&G BT RIC 7X $3990
        High-End – Pure C&G BT RIC 5X $3190
        Mid-Range – Pure C&G BT RIC 3X $2390

         

        About Sounds of Life Sounds of Life Audiology is a leading, independent hearing aid specialist.  We offer affordable hearing aid pricing on quality hearing aids (including virtually invisible hearing aid technology) from the world’s leading brands including Siemens, Signia, Phonak, Starkey, Unitron, Resound, Bernafon, Oticon and Sonic Innovations. Contact Us today on 1300 744 432

        Starkey Livio AI Hearing Aid Review

         

         

         

        Starkey Livio AI Hearing Aid Review

         

        Do you remember when a mobile phone was just a phone, only used to make phone calls and to communicate?  Then smartphones came along, including popular models like the Apple iPhone, transforming the way people used their mobile phone.

        Today, mobile phones are used not only to make and receive phone calls, but also, for endless other applications including web browsing, photo/video recording, personal navigation, music and video streaming.  Many of these functions are the result of the smartphone’s significant computational power, their range of sensors (e.g. magnetometer, gyroscope and accelerometer) and their support for wireless technologies (such as Bluetooth, Wi-Fi) for connection to the internet and other devices.

        The new Starkey Livio AI hearing aids (released in Australia in early 2019) are being promoted by Starkey as the hearing aid equivalent to the smartphone.  Like smartphones they are designed to be multifunctional devices, transforming what hearing aids currently do, by offering more than just better hearing.  In addition, to offering the latest hearing aid amplification technology, they also support a broad range of functionality, particularly in the area of general health.

        The Starkey Livio AI hearing aids use a brand-new chipset with embedded sensors.  These embedded sensors are used to monitor the wearer’s movement and the hearing aids use   this information to support several interesting features:

        Health Monitoring

        The Starkey Livio AI also uses the embedded sensors to monitor wearer’s physical activity.  The hearing aids come with a free app health app called the Thrive App. The Thrive App is downloadable from the Apple App Store of the Google Play store.  The appt is designed to measure both physical and cognitive health through two measurements; Body score and a Brain score.

        The Body score is calculated through a combination of activity, steps and overall movement. This information is tracked daily and accessed easily in the Thrive app.   The Brain score is calculated through a combination of hours of hearing aid use, social engagement and the tracking of active listening.

         

        Fall Detection

        The Starkey Livio AI also uses the embedded sensors to be able to detect falls.  Falls are a significant problem with the elderly.  When the hearing aids detect a fall, a notification is sent (via the mobile phone) to a pre-set loved one, so they know that the hearing aid wearer has taken a fall.

         

        Other New Features

        In addition to offering innovative features like Activity/Health Monitoring and Fall detection, the embedded sensors are also used to make the general management of hearing aids easier.  Normally when wearers want to adjust their hearing aids (e.g. adjust the volume), they must manipulate small controls (like switches) on the hearing aids.  This can be quite challenging for elderly users.  Starkey utilises these embedded sensors to offer a new feature called Tap Control.  Wearers can control their hearing aids by simply tapping the hearing aids.  This makes management a lot easier for wearers.

        The Starkey Livio AI also offers real-time language translation through the Thrive app.  When communicating to someone in a foreign language, the person needs to simply ask the person to speak into the phone.  The Thrive App will then translate the language and then the translated audio will be streamed into the wearer’s hearing aids.   Currently this feature is only supported on Apple phones and when we tested it, it seemed quite buggy and unreliable.

         

        Connectivity

        Like most modern hearing aids, Starkey Livio AI support 2.4Ghz communication between the hearing aids and smartphones.   This includes offering “Made for iPhone” technology, where wearers can directly wirelessly stream audio into their hearing aids.  This is useful for taking phone calls or streaming music.  However, this technology is only available on Apple phones.  Android users will require an optional remote microphone accessory.  The accessory acts like a relay station to facilitate audio-streaming from any device supporting classic Bluetooth.  In addition, wearers can purchase a television streamer, to directly stream the audio from their television, wirelessly into their hearing aids.

         

        Available Models

        Starkey Livio AI is currently available in four models

        RIC R – Rechargeable Lithium-ion receiver-in-canal model

        RIC 312 – 312 battery powered receiver-in-canal model

        RIC 13 – 13 battery powered receiver-in-canal model

        BTE 13 – 13 battery powered behind-the-ear model

         

        Our conclusion

        We think it is exciting to have a hearing aid that does more than just improve people’s hearing.   The Starkey Livio AI offers several new and innovative features that are attractive and useful for some wearers e.g. fall detection.  However, ultimately people wear hearing aids to improve their hearing.  It is therefore crucial that hearing aids deliver the best sound quality and sound clarity in all situations including challenging situations with background noise.  Although Starkey Livio AI has some interesting and novel technology, we feel that in the area of audiological performance it lags behind Phonak, Unitron and Signia.  This is particularly evident in their directional microphone technology, which is particularly important for hearing clearly in challenging, noisy situations.

         


        Sounds of Life offers the Starkey Livio AI at Brisbane’s most affordable price:

        • Premium: Starkey Livio AI 2400 – $4800

        Lithium-ion rechargeable model is available (extra cost)

         

        About Sounds of Life

        Sounds of Life Audiology is a leading, independent hearing aid specialist.  We offer affordable hearing aid pricing on quality hearing aids (including virtually invisible hearing aid technology) from the world’s leading brands including Siemens, Signia, Phonak, Starkey, Unitron, Resound, Bernafon, Oticon and Sonic Innovations.

        Contact Us today on 1300 744 432

         

        Oticon Opn S Hearing Aid Review

         

         

         

        Oticon Opn S Review

         

        Oticon has a well-earned reputation of producing high quality hearing aids that deliver exceptional sound quality. In March 2019 Oticon launched an upgrade to its highly successful “Opn” hearing aid range (released back in 2016) called “Opn S”.

        Opn S is available in three levels of technology (Premium Opn S 1 & Opn S 2 and High-end Opn S 3) across four hearing aid models/styles:

                    • Opn S Mini RITE
                    • Opn S Mini RITE T (includes t-coil)
                    • Opn S 13 BTE
                    • Opn S Mini RITE-T Li-ion (lithium-ion rechargeable)

         

        Oticon’s “Open sound” Approach

        Like its predecessor, Oticon Opn S uses Oticon’s Velox™ sound processing platform and employs a sound processing approach Oticon calls “open sound”.  This approach attempts to improve both sound quality and speech clarity whilst maintaining situational awareness in challenging situations where there are multiple speakers in background noise (e.g. holding a conversation with a group at a table in a busy restaurant).

        Traditional hearing aid technology delivers speech understanding in such situations by focusing on one speaker using directional microphone technology.  Directional microphones focus on speech coming from the front while suppressing the rest of the sound environment.  This improves speech clarity from the front, however can adversely impact situational awareness as well as speech from other directions.

        Opn S focuses on delivering both speech clarity and natural sound experience in challenging, complex situations.  The goal being to enable wearers to hear speakers they want to hear (no matter where they are located relative to the wearer), while suppressing unwanted background noise so its audible but not disturbing.  It is understood that Oticon uses high-speed processing with a clever combination of directionality and noise reduction processing.

        One of the upgrades of the Opn S over its predecessor is dramatically improved feedback cancelling.

        What is feedback?

        Feedback is the whistling noise that occurs when sounds from your hearing aids escape and are re-amplified by the hearing aid (can occur if wearers put a phone to their ear or give someone a hug).  Oticon hearing aids have in the past struggled with feedback, however, the Opn S range did reduce the problems.  See below video for more information.

         

        Direct Streaming

        appOpn S supports direct wireless audio streaming technology enabling wearers to wirelessly connect directly to their iphone without the need for an intermediary device hanging around their neck.  Phone calls are clearer since the sound goes straight into their ears and background sound is automatically lowered.  Wearers can also listen to televisions, stereos and basically any device that has Bluetooth.

        Oticon also offers the free downloadable Oticon ON App that allows wearers the ability to discreetly control their Opn S hearing aids. The app is simple and elegant and can be used to control hearing aid volume and other useful features including:

         

        • Remote microphone – wearers can use their phone’s microphone instead of their hearing aids’ microphones. In situations where the wearer is at a distance to the sound source, the phone can be placed near the sound source (e.g. during a lecture their phone could be placed near the lecturer for improved speech clarity)
        • Management Features – Wearers can check the current battery level of their hearing aids.  In addition they can access hearing aid instructions as well as a “Find my hearing aid” feature should they misplace them

         

        Our Conclusion

        We continue to be impressed with Oticon Opn’s  sound quality.  We expect this to be enhanced further with the improvements made to the Otion Opn S’s feedback management system. However, for clients where speech clarity is the main priority, we have found that competitive systems (e.g. Phonak Marvel and Signia Nx) using narrow directionality provides better overall speech clarity.  The direct streaming capabilities of the Opn S are excellent with reported high stability and excellent sound quality.  The new new lithium-ion rechargeable option ;Opn S Mini RITE-T Li-ion, is a great addition to the Oticon range.  In our experience, the lithium-ion rechargeable models are the easiest hearing aids for wearers to manage in the industry.

        Sounds of Life would recommend the new Opn S to anyone who is active and regularly find themselves in challenging listening situations and who also require direct audio streaming capabilities.

         

         

        Sounds of Life offers the Oticon Opn S at Brisbane’s most affordable prices:

        • Premium: Opn™ 1 S – $3790
        • High-end: Opn™ 2 S – $2990
        • Mid-range: Opn™ 3 S – $2300

        Lithium-ion rechargeable models are available (extra cost)

         

         

        About Sounds of Life

        Sounds of Life Audiology is a leading, independent hearing aid specialist.  We offer affordable hearing aid pricing on quality hearing aids (including virtually invisible hearing aid technology) from the world’s leading brands including Siemens, Signia, Phonak, Starkey, Unitron, Resound, Bernafon, Oticon and Sonic Innovations.

        Contact Us today on 1300 744 432

         

        Sounds of Life’s Platinum Aftercare Package

         

         

         

        Sounds of Life’s Platinum Aftercare Package

         

         

        At Sounds of Life we recognise the importance of good aftercare.  All our hearing aids come standard with our free-of-charge “Platinum after-care package”. The package includes:

          • 36-month product warranty
          • Free annual hearing screening and hearing aid adjustment for three years
          • Free ongoing hearing aid clean and checks
          • Free hearing aid trial prior to purchase

         

        Why hearing aid aftercare should not be an after-thought 

        If you are a hearing aid wearer, it is likely that your hearing aids are playing a significant role in your daily life helping you to communicate.  Like all things we rely on, it is not only important to look after them, but to be confident that if something does go wrong, you will be immediately supported.  Due to the often-permanent nature of hearing loss, wearers of hearing aids are likely to require them for the rest of their lives and they will become important partners in life.

        Ongoing support and maintenance of hearing aids are important to ensure:hearing aid care

        • They are adjusted and fine-tuned to compensate for changes in hearing. Often hearing deteriorates over time due to natural ageing.
        • They are adjusted and fine-tuned to adapt to changes in needs or circumstances. Often changes to the hearing aids will be required due to changes in lifestyle (e.g. you may have started listening to more music and require a music program in your hearing aid) or health (e.g. you may have an ear infection and require temporarily a different style of ear mould)
        • They are working optimally and reliably. Hearing aids are sensitive electronic devices that operate in quite a hostile environment (ear canal).  They require regular cleaning/care and sometimes repair.

        When purchasing hearing aids, it is important to understand from your audiologist what levels of aftercare service is provided and the cost of this aftercare.  Key things to consider:

        (1) Hearing aid warranty

        The first thing to find out is the manufacturer’s warranty on the hearing aid itself.  At some point of time your hearing aids will require repair and if your hearing aids are out of warranty the costs could be significant.  It goes without saying the longer the manufacturer’s warranty the better.

        (2) Ongoing support and service

        It important to find out what aftercare service is provided and the cost of the service.  Important aftercare services include hearing tests, hearing aid adjustments, clean/check of hearing aids and the provision of consumables (batteries, earmoulds and tips/domes).

         

        If you feel hearing loss is impacting your life contact Sounds of Life.

        Contact us today on 1300 744 432 or via our contact form below:

         

          Your Name (required)

          Your Phone Number (required)

          Your Message

           

           

          About Sounds of Life

          Sounds of Life Audiology is a leading, independent hearing aid specialist.  We offer transparent and affordable hearing aid pricing on quality hearing aids (including virtually invisible hearing aid technology) from the world’s leading brands.

           

           

          Signia Styletto Connect Hearing Aid Review

           

           

           

          Signia Styletto Connect Review – High tech, stylish and now with Bluetooth connectivity

           

          Late last year, Signia launched a new hearing aid concept called “Styletto”.  Currently social stigma is one of the main reasons many people with hearing loss avoid getting hearing aids.  Styletto’s revolutionary modern, stylish and fashionable slim-line design was an attempt to transform the image of hearing aids from a medical product, that people avoid, to high-tech hearwear that people desire (or at least accept wearing).  Since its launch, Styletto has proved very popular particularly for first time wearers.  However, Styletto’s lack of wireless Bluetooth audiostreaming functionality limited its appeal to people that regularly use mobile phones in their everyday life.  This limitation was addressed with the launch of the Styletto Connect in 2019.

          Styling & Design

          The Signia Styletto Connect design concept is almost identical to that of the first Styletto.  Like Styletto it has a unique slim-RIC shape which is a significant shift from traditional hearing aid styling and shaping.  This is possible as the hearing aids do not use standard batteries, but rather use a rod-shaped rechargeable lithium-ion battery.  This enables Styletto to be much slimmer and sleeker than traditional hearing aids.  Its look and feel are very similar to the Styletto incorporating a beautiful high-quality brushed-metal finish with the Signia logo embossed into the housing.  However, compared to the original Styletto, it features much more rounded edging which we believe refreshes the look.

          Available in three colour combinations: Black & Silver, Cosmic Blue & Rose Gold and Snow White & Rose Gold (shown)

           

           

          Bluetooth audiostreaming

          For hearing aid wearers that regularly use the phone or enjoy listening to audio from their mobile devices, wireless connectivity to consumer electronic devices, like smart phones, is a highly desirable feature.   Styletto Connect supports Bluetooth wireless connectivity.  The Styletto Connect features Made for iPhone “low-energy” Bluetooth connectivity for direct wireless connection to Apple iPhone and iPads.  When using this technology, the hearing aids become virtual wireless headsets enabling wearers to stream audio wirelessly into their ears.  This means wearers can experience phone calls without having to hold the phone up to their ears.  In addition, they can enjoy watching movies and listening to music as if their hearing aids were wireless headphones.

          For non-Apple users, wireless audiostreaming to their Styletto Connect hearing aids is also possible, but requires the purchase of an additional accessory called StreamLine Mic.  The StreamLine Mic facilitates a “Classic” Bluetooth connection to virtually any Bluetooth device and then wirelessly streams audio to the hearing aids using a proprietary “low-energy” Bluetooth connection.  One of the other advantages of the Streamline Mic is that it can be turned into a remote microphone.  If wearers need to listen to a speaker at a distance e.g. at a lecture, they can give the Streamline mic to the speaker and it will be able to wirelessly stream audio directly into the hearing aids at a distance of up to 15 metres.

          Another useful device that Styletto Connect wearers can purchase is the StreamLine TV accessory.  StreamLine TV connects to the television and streams high quality Dolby digital audio, wirelessly into wearers’ Styletto Connect hearing aids.  For wearers that watch television regularly this is a must have accessory.  Streaming can flexibility set-up with a variety of options.  For example, it can be set-up so it streams TV audio only (with the hearing aid microphones muted) or streams TV audio with the hearing aid microphones active (so the wearer can hear both the television and environmental sounds).

           

          Rechargeability

          The Signia Styletto Connect uses the same recharging concept as the standard Styletto.  The charger itself has been cleverly designed to be part of the carry case.  It is designed for portability in mind for people “on the go”.  It is the smallest hearing aid charger in the industry.  The carry case is so small it can be put in the wearer’s pocket while it recharges their Styletto Connect hearing devices.

          Styletto Connect’s lithium-ion battery gives the wearer up to 19 hours of wearing time per charge (16 hours if doing 5 hours of Bluetooth Streaming). In order to support Bluetooth streaming, Styletto Connect uses a higher capacity battery compared to Styletto.

          To recharge Styletto Connect, wearers simply need to insert their Styletto Connect’s into the carry case and they will be fully charged in 3 hours.  If wearers are running low and do not want to do a full charge, a quick 30-minute charge will provide wearers 5 hours wearing time (3 hours if streaming).  The carry case’s internal lithium-ion battery provides enough capacity to offer three full charges of Styletto Connect before itself needing recharging (via a USB connection or mains power).  This means that if wearers are going on a short camping or business trip, they can have up to four full day’s autonomous “plug-free” use (do not need to carry extra cords or a power supply).

          There are several design improvements on the charger.  In addition to the obvious colour change from “granite” to “white”, the charger’s LEDs (indicating the hearing aid charging status), have been moved from the front of the charger to the top (next to the charger inlays where the hearing aids sit).  This is a much more intuitive design.

          Controls

          The Styletto Connect hearing aid is designed to be fully automatic.  They adaptively adjust their settings in different sound environments to ensure wearers experience natural and clear sound.  However, most wearers do desire the ability to adjust the settings of their hearing aids in certain situations.

          Unlike most hearing aids on the market, the Styletto Connect does not feature any physical controls on their housings.  This decision was made obviously to keep their design sleek and slim.  Instead Styletto Connect has been designed to be operated remotely.  This can be achieved by purchasing the optional miniPocket remote control or downloading for free a smartphone App called the Signia MyControl App.  The myControl App is compatible with both Apple phones as well as selected Android phones.  Compatibility with Android phones is limited.  A list of compatible devices can be found here: https://www.signia-hearing.com.au/mycontrol/

          The myControl App allows wearers to remotely control features of their Styletto Connects.  Wearers can remotely change basic features such as volume, treble as well as access different programs for different situations.  In addition, in challenging and special situations, wearers can access and control advanced features like the direction they want the hearing aid’s microphones to face, as well as how directional they want the microphones.  This functionality is highly beneficial in very noisy situations where speech understanding is challenging.

           

          Performance

          Styletto Connect uses Signia’s latest “Nx” audio processing chip so wearers can expect outstanding sound quality and speech clarity even in challenging situations.  The Signia Nx chip supports binaural sound processing using a full wireless audio link between bilateral hearing aids; left and right.  This binaural processing delivers some very useful features include:

          Own Voice Processing – the Styletto Connect’s can detect when the wearer is speaking and automatically adjust its sound processing, so the wearer perceives their own voice more naturally (less “boomy” or “echoey”).

          Narrow Directionality – in situations with a lot of background noise, the Styletto Connect’s adaptively adapt their directional microphones to focus in on the speaker to the front.  In challenging situations with a lot of background noise, the Styletto Connect’s can provide extremely narrow directionality.  This technology is highly effective at reducing background noise.  In fact, the speech understanding of wearers with moderate hearing loss have been shown to outperform normal haring in noisy “cocktail party” like situations*. This feature operates automatically, but wearers can also control the width and direction of the beam via the MyControl smartphone App (described above).

           

          Conclusion

          Styletto Connect is a very exciting hearing aid.  Stigma is a significant issue preventing a lot of people with hearing loss wearing and benefiting from hearing aids.  Styletto Connect’s stylish and fashionable design will likely appeal to many people that may have been reluctant previously to wear hearing aids due to their look.  While possibly addressing the reluctance of many people from wearing hearing aids, the Styletto Connect’s do not compromise on performance.  They feature the very latest high performance audiological features as well as full Bluetooth connectivity.  In addition their design is highly practical design (with portable lithium-ion rechargeability) which will appeal to active people “on the go”.

          Styletto Connect is available in one power version suitable for hearing aid wearers with mild to moderately-severe hearing loss.  They come in three performance levels: Styletto Connect 7 (Premium), Styletto Connect 5 (High-End) and Styletto Connect 3 (Mid-Range).  Please note Styletto Connect is only available in a binaural kit with charger.  Sounds of Life’s pricing for Styletto can be found here.

           

          If you are interested in a free trial of Styletto please contact Sounds of Life on:

          1300 744 432

           

          Check out Signia’s Styletto Connect global launch video

           

          About Sounds of Life

          Sounds of Life audiology is a member of Audiology Australia and Independent Audiologist Australia. We adhere strictly to Code of Conduct and Code of Ethics.   We pride ourselves on:

          • Being fully independent – We are not owned or operated by a hearing aid manufacturer or large chain.
          • Ethical Practices – We are focused on providing the highest level of care and do not pay commissions.

          We also follow the Australian Government Hearing Services’ protocol for hearing services.

           

          If you feel hearing loss is impacting your life contact Sounds of Life.

          Contact us today on 1300 744 432 or via our contact form below:

           

            Your Name (required)

            Your Phone Number (required)

            Your Message

             

            *Two independent clinical studies have shown that binax can even exceed normal hearing in certain challenging hearing situations (University of Northern Colorado, 2014; Oldenburg Hearing Center, 2013): Speech Reception Thresholds (SRT) in cocktail-party situations improved up to 2.9 dB for wearers with mild to moderate hearing loss using Carat binax or Pure binax hearing aids with narrow directionality, compared to people with normal hearing.

            Phonak Marvel Hearing Aid Review – Super hearing technology fit for a superhero

             

             

             

             

            Phonak Marvel Hearing Aid Review – Super hearing technology fit for a superhero

             

            In December 2018, Sounds of Life released the new Phonak Marvel hearing aid.  It is rare that we get to review such a complete hearing aid that is truly a Blockbuster with industry-leading technology.  Before we talk about the Phonak Marvel, lets have a look at recent hearing aid technology development.

            Over the last three to four years, hearing aid manufacturers have focused on three major technology areas:

             

            1/ Bluetooth connectivity, particularly supporting direct audio-streaming from smartphones*

            2/ Audiological performance, particularly in challenging situations (e.g. noisy environments)

            3/ Rechargeability, particularly integrated lithium-ion battery rechargeable technology

            (*without extra accessories)

             

             

            While historically specific manufacturers were leaders in a single area (for example, for the last five years, Resound has been the industry leader in Bluetooth audio streaming support), no manufacturer has provided industry leadership in all three areas.  That is until now!

            Phonak hearing aids are well known for offering outstanding audiological performance and sound quality, however it is fair to say they have lagged the competition with regards to Bluetooth connectivity.  In fact, they have been the only manufacturer without a Made-For-iPhone* hearing aid.  That has all changed with the release of the new Phonak Marvel hearing aid range.  The new range delivers industry-leading performance (with some noteworthy industry-firsts) in all three areas.  Lets take a closer look.

            *Made-For-iPhone hearing aids provide direct Bluetooth wireless audio-streaming from Apple devices e.g. iPhone. iPads (with an intermediary device)

            Bluetooth Connectivity

            Phonak Marvel hearing aids can wirelessly stream audio (to both hearing aids) to and from any device capable of streaming audio via Bluetooth. This includes any of the following:

            • iPhone and iPad
            • Android, Windows, Blackberry, and other Bluetooth-enabled phones and tablets
            • Mac, Windows, Linux, and other Bluetooth-enabled computers
            • Any other device with Bluetooth audio streaming

             

             

            Phonak Marvel is the only hearing aid to allow direct audio streaming (without an intermediary accessory) to and from all modern Bluetooth devices.  Direct streaming in other hearing aids is currently limited to Apple devices (Made-For-iPhone technology) with the one exception of ReSound (who has promised their recently released Resound Quattro hearing aids will support direct streaming from Android devices in the future).  In addition the Phonak Marvel offers true hands-free calling.  The wearer’s voice is picked up by the hearing aids’ microphones and sent through the smartphone (other hearing aids require the phone to be held up and the voice picked up by the microphone on the smartphone).

            For television watching, wearers can experience high quality audio wirelessly streamed directly from Bluetooth-enabled TVs into their Phonak Marvel hearing aids, transforming them into wireless headphones.   For non-Bluetooth TVs, an optional Phonak TV Connector accessory can be purchased and connected to the television.

             

             

            Audiological Performance

            Phonak Marvel uses an upgraded sound processing technology Phonak calls AutoSense OS 3.0.  This technology identifies and automatically adapts to the various situations (and varying acoustic environments) wearers experience in their everyday life.  Phonak hearing aids have a great reputation for delivering excellent speech clarity particularly in challenging situations with background noise.  The Phonak Marvel uses the very latest high performance directional microphone and noise reduction technology, Phonak calls Binaural Voice Stream Technology.  This unique Phonak technology was developed based on the fact that two ears hear better than one.  The technology streams the full audio bandwidth in real time and bidirectionally, tackling challenging listening situations by simulating what the brain does with sounds from both ears.  The benefits of this technology is that it delivers outstanding speech clarity in challenging situations with background noise.

             

            Rechargeability

            Phonak offers a lithium-ion rechargeable model option called the Audeo M-R.  The Phonak Audeo M-R  offers wearers the convenience of not having to regularly change batteries.  At the end of the day, wearers simply need to put their hearing aids in the charger case and over night they will be fully recharged (a full charging cycle takes approximately five hours).  After charging, when the hearing aids are removed from the charger case they conveniently turn on automatically.

            Phonak offers two charging case versions:

            • The Phonak Mini Charger Case (pictured) which is a compact charger
            • The Phonak Charger Case Combi which is a charger, drying kit and protective hard case, all in one.  A Phonak power pack can be attached to the Charger Case Combi enabling recharging on the go (no need for a power connection).

            In terms of battery life, with no Bluetooth streaming, wearers can expect the Audéo M-R to last 24 hours on a single charge. With Bluetooth streaming (4 hours of TV streaming plus 4 hours of Bluetooth streaming), wearers can expect 16 hours of total use time.  The rechargeable battery is expected to last around 6 years before it will need to be replaced.

             

            Models

            Phonak Marvel is currently available in both a standard and a rechargeable receiver-in-canal (RIC) model: Phonak Audeo M-312 and Phonak Audeo M-R (rechargeable).  It is expected that additional models (including models with t-coil) will be released by Phonak in early 2019.  The Phonak Marvel RIC hearing aids are available in four performance levels (M90/M70/M50/M30) from Sounds of Life and are priced from $1390 each.

            Non-Rechargeable

            Premium – Phonak Audeo RIC M90 $3899
            High-end – Phonak Audeo RIC M70 $2990
            Mid-Range – Phonak Audeo RIC M50 $2190
            Entry-Level – Phonak Audeo RIC M30 $1390

             

             

             

            Rechargeable

            Premium – Phonak Audeo RIC M90-R $3999
            High-end – Phonak Audeo RIC M70-R $3150 
            Mid-Range – Phonak Audeo RIC M50-R $2390
            Entry-Level – Phonak Audeo RIC M30-R  $1590

             

             

             

            Our Conclusion

            Phonak has always been at the forefront of sound processing technology and they have a good reputation of delivering excellent all-round performance particularly in challenging situations with background noise.  The new Phonak Marvel builds on this reputation and delivers industry leading performance in the key areas of audiological performance, Bluetooth connectivity and rechargeability.  Since launch we have had the opportunity to fit a number of Phonak Marvel hearing aids to our clients.  So far the feedback has been excellent particularly around the benefits of Bluetooth connectivity (especially Android phone users).

             

            About Sounds of Life

            Sounds of Life audiology is a member of Audiology Australia and Independent Audiologist Australia. We adhere strictly to Code of Conduct and Code of Ethics.   We pride ourselves on:

            • Being fully independent – We are not owned or operated by a hearing aid manufacturer or large chain.
            • Ethical Practices – We are focused on providing the highest level of care and do not pay commissions.

            We also follow the Australian Government Hearing Services’ protocol for hearing services.

             

            If you feel hearing loss is impacting your life contact Sounds of Life.

            Contact us today on 1300 744 432 or via our contact form below:

             

              Your Name (required)

              Your Phone Number (required)

              Your Message

               

               

              Widex Evoke Fusion 2 RIC Review – Delivering a Personalised Hearing Experience

               

               

               

              Widex Evoke Fusion 2 RIC Review – Delivering a Personalised Hearing Experience

               

              In this post we review the new Widex Evoke Fusion 2 receiver-in-canal (RIC) hearing aid which was released in Australia in July 2018.  The hearing aid is well-featured and includes the latest “Made for iPhone” 2.4 GHz Bluetooth technology for connectivity and direct streaming of audio from Apple smartphones and tablets.

              Widex is at the forefront of sound processing technology and they have a good reputation of releasing hearing aids with excellent sound quality.   However, as good as objective sound processing technology can be, sound quality certainly has a “subjective” element to it.  What sounds good for one person, may not sound good to another!

               

              Widex addresses this “subjective” element with the new Evoke Fusion 2 RIC hearing aid.  It features a new technology called “SoundSense Learn” offering wearers a more personalised hearing aid listening experience by learning the wearer’s sound preferences in specific situations and environments.  In addition to this, the hearing aids take advantage of the experience from “other similar” wearers, in “similar situations”, from across the globe.  Using this “cloud sourced data”, the Widex Evoke Fusion 2 RIC hearing aids are able to learn from other wearers’ experiences, so they can adapt and improve their performance over time.

               

              Why is personalisation important?

              We all know that hearing aid technology and performance is improving rapidly.  With every new generation of hearing aid technology, we see improvements in sound processing as well as new and improved features and functionality.  Who would have thought 10 years ago, hearing aids could be used as a wireless headset to directly stream music and phone calls?

              However, every individual has different needs, preferences, lifestyles and of course hearing loss.   For wearers to truly benefit from these technological improvements, the hearing aids need to be highly customised and optimised for each wearer.  The audiologist has a challenging role in fitting hearing aids, ensuring that the hearing aids are optimally programmed and customised to satisfy these unique hearing needs and preferences.  This customisation includes ensuring that the basic sound amplification (e.g. frequency response, compression) appropriately compensates for the wearer’s hearing loss and ensuring hearing aid programs, features and settings match the wearer’s lifestyle needs and preferences.

               

              How do audiologists personalise hearing aids?

              prices of new hearing aidsThe audiologist may begin with case history to understand the wearer’s lifestyle needs and preferences, then measure and quantify their hearing loss.  The hearing aids will then be programmed to precisely amplify sound correctly at each individual frequency (as hearing loss varies across the frequency range).  In addition, hearing aid features and functionality will be set-up to meet the wearer’s lifestyle needs and preferences.

              A follow up appointment is usually scheduled some weeks after the fitting, once the wearer has experienced the hearing aids in their everyday environments.  Based on the wearer’s feedback, if the hearing aids were too loud or too soft in certain situations, the audiologist would fine tune the hearing aids to optimise the hearing aid performance for the wearer.  More details about this process can be found here.

              There are some challenges in this process. Firstly, the audiologist not having the first-hand experience in the wearer’s hearing situations, may not be able to comprehend the factors contributing to their hearing difficulties (they are making assumptions).  Neither is it easy for wearers to accurately communicate their sound preferences for a host of hearing situations. F inally, the hearing clinics are usually soundproofed for conducting hearing tests, bearing little resemblance to real world listening situations.  A hearing aid that is optimally fitted in a quiet soundproof room may not always perform adequately in real life noise-filled environments.

               

               “Sound-Sense Learn” hearing aid learning technology

              Now imagine having an audiologist by your side constantly adjusting your hearing aid settings to best match your hearing needs in different situations?  This is what Widex’s new learning technology is all about, except you can leave the audiologist back in the clinic.

              Widex Evoke Fusion 2 RIC hearing aids feature a new technology called “Sound-Sense Learn” that automatically learns the wearer’s sound preferences in specific situations/environments, but also by using the collective listening preferences of “other similar” wearers, in “similar situations”, across the globe.

               

              How does  “Sound-Sense Learn” work?

              Wearers adjust their hearing aids using the “SoundSense Learn” smartphone app.  In situations where the wearer feels the hearing aids do not sound as good as they would like, they use the app to guide them to improved sound quality.

              The app lets wearers listen to two different settings: A and B.  The differences between A and B is frequency response (adapted via an equalizer).  After listening to both A and B settings, the wearer can determine which one they like best (in the app, the slider can be moved to select the options like: “moderately better“, “a lot better“, or “a little bit better“).  Once selected, the wearer will listen to another A and B sample.   They can go through a number of samples until they are happy and select the option: “Yes, this is my intention in this environment, my needs are being met right now.”  In addition to wearers being able to save this setting as a favourite (to be used again when they are in the same situation or environment), over time, the hearing aids learn the wearer’s sound preferences and they adapt automatically.

              One of the interesting things about this “learning” is that the information can be uploaded into the “Widex cloud” where Widex analyses the data from thousands of users across the world.   If Widex sees a trend from this “crowd-sourced data pool”, they can provide the option of remotely updating the hearing aids’ firmware (via the user’s smartphone), of all the Evoke hearing aids in use around the world.

               

               

               

              Our Conclusion

              Widex has always been at the forefront of sound processing technology and they have a good reputation of delivering excellent sound quality.   The Widex Evoke Fusion 2 RIC hearing aids offer the ability for an even better experience for wearers, through advanced learning technology that adapts the sound quality for the individual wearer.  The hearing aids will be particularly helpful for clients who previously may have had difficulty achieving satisfactory settings in their hearing aids (many fine-tuning sessions).  If they are willing to spend the time “teaching” their hearing aids they can achieve highly personalised settings.

              The Widex Evoke Fusion 2 RIC hearing aids are available in four performance levels (440/330/220/110) from Sounds of Life and are priced from $1750 each.

              Premium – Evoke 440 RIC – $3890
              High-end – Evoke 330 RIC – $2990
              Mid-Range – Evoke 220 RIC – $2100
              Entry-Level – Evoke 110 RIC – $1750

               

               

              About Sounds of Life

              Sounds of Life audiology is a member of Audiology Australia and Independent Audiologist Australia. We adhere strictly to Code of Conduct and Code of Ethics.   We pride ourselves on:

              • Being fully independent – We are not owned or operated by a hearing aid manufacturer or large chain.
              • Ethical Practices – We are focused on providing the highest level of care and do not pay commissions.

              We also follow the Australian Government Hearing Services’ protocol for hearing services.

               

              If you feel hearing loss is impacting your life contact Sounds of Life.

              Contact us today on 1300 744 432 or via our contact form below:

               

                Your Name (required)

                Your Phone Number (required)

                Your Message